Brake and clutch lever model ‘STAGE’

Identification - PBD KBA 91516

(only applies to orders until 05/06/2024)

For preventive consumer protection, probrake GmbH provides information on the dangers that can arise from brake and clutch levers model ‘STAGE’ with the marking PBD KBA 91516. In rare individual cases, a safety problem may occur. The screw connection between the ‘lever’ and the vehicle-specific ‘adapter’ can come loose under certain circumstances and in rare cases.

We regret that these circumstances have occurred despite our intensive quality assurance measures. Although this case can only occur in an unlikely combination of various circumstances, we have decided to carry out this product recall. The safety of our customers and their trust in the quality of our products is our top priority and should be guaranteed at all times. Therefore, we consider it good business practice to conduct a product inspection in this situation as well.

probrake – Motorrad Stahlflexleitungen, Brems-und Kupplungshebel, Bremsscheiben und mehr direkt vom Hersteller | screw connection
probrake – Motorrad Stahlflexleitungen, Brems-und Kupplungshebel, Bremsscheiben und mehr direkt vom Hersteller | fff

If the screw comes loose, in the worst case the entire brake lever can detach from the adapter, with the result that the brake becomes non-functional.


This can result in serious and severe personal injury and damage to property.


Motorbikes with affected brake & clutch lever(s)

must not be put back into operation until the safety risk has been eliminated.

Solution to eliminate the security risk

1. Check screws

Please check the screw connection according to the instructions provided. If the connection is not tight, select one of the following options to eliminate the safety risk.

 

Once the bolts are firmly seated, the motorbike can continue to be used as usual – no further action is necessary. In this case, there is no safety risk due to the screw connection.

2. Optional - order replacement screws

You will receive a new set of screws with coated threadlocker free of charge for installation on site. It is not necessary to return the removed screws.

Please fill out the following form and select the desired option: 

For technical and general inquiries, the probrake GmbH team is happy to assist you via email at support@probrake.de.